First time here
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
First time here
Hello just joined this amazing website, ive had a couple of seagulls in the past though both good runners so no work was needed on them.Ive now got a silver century that I was told hadnt run for 20 years, it was totally dead no spark everything gummed up,will post pictures when I work out how to. looking loads better now good spark carb cleaned etc so getting there thanks to the mass of helpfull info here so thankyou all for that.
Re: First time here
Let me be one of the first to welcome you, Pete.
This site created by John Williams truly attains its goal and purpose...saving old Seagulls.
Hope you enjoy it as much as I do!
Dave from Ottawa Canada (where British Seagulls are just about totally unheard of)
This site created by John Williams truly attains its goal and purpose...saving old Seagulls.
Hope you enjoy it as much as I do!
Dave from Ottawa Canada (where British Seagulls are just about totally unheard of)
Silver Century 1971, Evinrude 8hp 1988, Evinrude 2hp 1987
Re: First time here
give up while you can, they breed
oh and welcome to the madness
oh and welcome to the madness
-
Collector Inspector
- Posts: 4196
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: First time here
Before you know it parts become useful in the household 
B
B
- Attachments
-
A chicken is one egg's way of becoming others
Re: First time here
Hi Pete
Welcome to the site where you become crazed by these wee engines.
You'll soon have a few, it's a certainty. We've all been through it. Mind you, some put parts in the dishwasher or oven so if you're married be prepared for some harsh words from the missus.
Enjoy the site, I'm sure you will. The guys here have years of experience and knowledge, and give it freely, it's great for non-mechanical guys like myself to learn.
Don't be scared to ask questions, if it's not on the site previously, the guys will give you their wisdom. Some good ........some duff, but you'll get their.
On all seriousness, you'll get help and good advice and we've even got our own guy for spares, John SOS. One bit of advice, check John's prices before you buy from fle-ebay, there's more chance the bargains aren't bargains, and John's parts are genuine and well priced.
Gerard
Welcome to the site where you become crazed by these wee engines.
You'll soon have a few, it's a certainty. We've all been through it. Mind you, some put parts in the dishwasher or oven so if you're married be prepared for some harsh words from the missus.
Enjoy the site, I'm sure you will. The guys here have years of experience and knowledge, and give it freely, it's great for non-mechanical guys like myself to learn.
Don't be scared to ask questions, if it's not on the site previously, the guys will give you their wisdom. Some good ........some duff, but you'll get their.
On all seriousness, you'll get help and good advice and we've even got our own guy for spares, John SOS. One bit of advice, check John's prices before you buy from fle-ebay, there's more chance the bargains aren't bargains, and John's parts are genuine and well priced.
Gerard
Re: First time here
That's good advice from Gerard. John is very good.
A further warning about Ebay - there are lots of people selling stuff that's wrongly described, sometimes in a condition that's unusable, and frequently hopelessly optimistic about what'll fit what. John is genuinely knowledgeable.
A further warning about Ebay - there are lots of people selling stuff that's wrongly described, sometimes in a condition that's unusable, and frequently hopelessly optimistic about what'll fit what. John is genuinely knowledgeable.
-
Loiner1965
- Posts: 23
- Joined: Wed Sep 05, 2012 6:27 am
- Location: Leeds
Re: First time here
my century plus was the same.....ultrasonic cleaned the carb and float chamber and made sure everything was spotless...
remove ht lead and check it has continuity between both ends.
where the ht lead fits into the coil i cleaned the contact with a dremel and refitted everything.
mine fired up first time and i had no spark when i bought it.
my coil was ok as i checked with a multi meter but i had a duff ht lead.
when i fitted the new lead i still had no spark hence i cleaned the coil contact
remove ht lead and check it has continuity between both ends.
where the ht lead fits into the coil i cleaned the contact with a dremel and refitted everything.
mine fired up first time and i had no spark when i bought it.
my coil was ok as i checked with a multi meter but i had a duff ht lead.
when i fitted the new lead i still had no spark hence i cleaned the coil contact
Re: First time here
Thanks all for making me welcome,im sure I will gain much knowledge,some badly needed. 
Re: First time here
Have put serial number past identifier .WSPCL1656EE6. and engine comes up as
Years Manufactured 1969 to 1979/ Manufacture Date: May 1976
Series Silver Century long shaft
Model Plus - Clutch Drive
HP 5
Ignition Wipac Mk 2
Gear Oil SAE or EP 140
Years Manufactured 1969 to 1979/ Manufacture Date: May 1976
Series Silver Century long shaft
Model Plus - Clutch Drive
HP 5
Ignition Wipac Mk 2
Gear Oil SAE or EP 140
Re: First time here
Welcome aboard, Pete. Hope you enjoy your engine both during restoration and in use!
There is nothing so useless as doing efficiently that which should not be done at all.
- Prof. Peter Drucker
- Prof. Peter Drucker