jet size
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
-
Rob Ripley
- Posts: 442
- Joined: Fri Mar 10, 2006 11:38 am
- Location: Melbourne, Australia
jet size
I've lost the key to replace the jets on the Amal carby. The jets are in a carby with a broken thread, I have another carby (with good thread). What is the size of the square end, so I can make another one?
Re: jet size
Hi Rob,
it's 5mm square!
Cheers,
John
SOS
it's 5mm square!
Cheers,
John
SOS
-
Rob Ripley
- Posts: 442
- Joined: Fri Mar 10, 2006 11:38 am
- Location: Melbourne, Australia
Re: jet size
Success, 5mm OD copper pipe and a 6" triangular file with the tang that has a square taper up to 5.5 mm. A bit of gentle hammering and Voila! a jet key!