pullstart -non seagull

mrdraddy · Post by **mrdraddy** » Tue Apr 08, 2008 7:31 pm

long shot this but does anyone have a pullstart assembly for a yamaha 3.5 air cooled single? Got this motor with a dinghy i just bought,its a runner and in reasonable condition,seems a shame to scrap it.
alternatly does anyone want it? will sell/swap etc

Andy · Post by **Andy** » Wed Apr 09, 2008 6:52 am

Hi Paul
I've got several boxes of Yamaha bits and I'm sure there is a recoil in there somewhere, I'll have to check. If I have a recoil I'd be happy to sell it to you, alternatively if you want to swap the engine I do have most Seagull parts (old and new) if there is anything you need.
Regards
Andy

mrdraddy · Post by **mrdraddy** » Wed Apr 09, 2008 7:51 pm

The only reason i want a pullstart is to increase its value when i sell it as its not really my thing(ie; non-seagull!)I could do with the 2 threaded rods that hold both sides of FP transom clamp together along with the plastic "pawl" that holds the motor up when in the raised position,oh and a tank decal fora 102. If you can help with any or all then the yamahas yours.
It really doesn't owe me much to tell the truth,i only gave Â£40. for it along with a 9ft dinghy!

Andy · Post by **Andy** » Thu Apr 10, 2008 7:49 pm

Hi Paul
Have checked through all my boxes and I'm really sorry but no recoil start! I can't believe it, everything else except that.
Sorry to have wasted your time.
Regards
Andy

mrdraddy · Post by **mrdraddy** » Thu Apr 10, 2008 10:14 pm

No worrys andy,thanks for looking,if you want to trade for parts(see my earler post) let me know. If anyone could make use of this motor( its really not bad apart from the pullstart)again let me know,

Saving Old Seagulls

pullstart -non seagull

pullstart -non seagull

yamaha 3.5

Yamaha 3.5hp