Thinning the flock

You can talk about almost anything here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
andrew
Site Admin
Posts: 118
Joined: Wed May 24, 2017 5:37 pm
Location: ..

Thinning the flock

Post by andrew »

Nothing fancy about these 2 motors but thought I’d post a couple pics since I had them handy. Sold these as a pair this week.

SJP28539L I never touched after buying a few years ago, has great spark when spun by hand and all the bits there so would come to life with a little service. Rusty exhaust and drive shaft tubes let it down but otherwise would clean up well and be a fun rebuild for next owner.

SJP40964L bitsa with wipac ignition, I put this together from a mix of FPL and SJPL parts. Pretty good original chrome and in great running condition with the wipac on top. There is a short thread on the forum for this build from a couple years back.

Have started thinning out my flock, sold 4 motors in last couple months; these 2 plus a silver century plus and a featherweight both in great condition after I did mechanical and cosmetic work on them. But do not worry, my target is only to get back to under 10 gulls by selling unneeded duplicates etc!
D1447EF9-9EE9-4382-98D7-FE317757E6AD.jpeg
AF039AD5-9ACC-4AE5-908A-749E9AA6B298.jpeg
474C656F-F725-4946-A6E8-810276055512.jpeg
474C656F-F725-4946-A6E8-810276055512.jpeg
78CAC208-F9DD-4F47-97F4-5335C0F106BF.jpeg
4C861BFD-6081-4BD6-AD75-33FF494CEC88.jpeg
F54148FA-58CB-4AC7-88C3-313462983ED6.jpeg
You do not have the required permissions to view the files attached to this post.
Post Reply