Prop identification (not Seagull)

Stelios_Rjk · Post by **Stelios_Rjk** » Sun Jul 07, 2013 7:50 pm

Hi guys,

I just came across this prop, should be from a really small engine. Its diameter is 6 & 3/4 of an inch.

Any ideas from where is it coming from?

Thanks

Post by **RickUK** » Mon Jul 08, 2013 9:34 am

Would think its off one of the little Evinrudes or Johnsons - not from a European motor. Left handed drive.

phil · Post by **phil** » Mon Jul 08, 2013 10:50 am

Does not look omc or any North American maker in the last 60-70 years that I can think of, post it on AOMCI.org ask-a-member section someone will probably recognize it.
It's the backside that is very odd, maybe something missing.

Saving Old Seagulls

Prop identification (not Seagull)

Prop identification (not Seagull)

Re: Prop identification (not Seagull)

Re: Prop identification (not Seagull)