Page 1 of 1

25:1 question

Posted: Thu Jun 07, 2012 11:48 pm
by anlogr
Is it possible to detect if a carb has been converted without removing the jets? Dont have spanner and John has run out.

Re: 25:1 question

Posted: Fri Jun 08, 2012 2:10 pm
by Taspiper
Villiers?
You have to pull the needle out of the slide by removing the adjustment screw above it. 2 stamped on needle and it's probably converted, 3 and it's 10:1

Re: 25:1 question

Posted: Fri Jun 08, 2012 2:31 pm
by Charles uk
Rolf I think he's asking about a twin jet carb & they have the number stamped on the side of the jet, Seagull carry Jet keys if John has none.