Anzani Decals & Parts

[AusAnzani]

Hi guys,

I am looking for Anzani Decals (Pilot, Super Single, Unitwin) or artwork and am hoping someone here may be able to put me on to a supplier.

I am also in need of the carburetter cover (both halves and associated components) for an Anzani Unitwin.

Any assistance you can provide would be greatly appreciated.

Thanks & Regards,

[AusOB_Collector]

Hi Spiro

Ask Steve about parts for the unitwin, last time I checked he had a parts motor with that stuff on it.
Check texts for pic of decals.
Decals will have to be reproduced as there are no current makers for them.

Cheers
BP

[Keith.P]

I made up my own decal for my unitwin, I will probably do the same with the pilot when I get around to doing another one up.
I think I still have the artwork about for the untwin, you can not get the decal's, so its just as easy to make them.

[AusAnzani]

Hi Boyd, checked with Steve a while ago. At that stage he did not have a spare carb cover. Thanks for the suggestion anyway.

Hi Keith,

This is as far as I've got with the decal for Anzani SS (Tank rear), again using only Microsoft Powerpoint - not ideal. All that's white will be gold and the black blocked areas are just to remind me that I have more wing feathers to do. Other colours will be tweaked.



The Pilot decals are in my old Pilot thread. I really should get around to painting the tank and finishing that off one day

None of my decals are exact replicas of the originals, hence my preference for proper decals or artwork.

I would also love to see what you have available.

[ovuorile]

Hi Boyd,
Do You mean these decals. I have remade them from original tank decals by my fried how have bussines to do these things. I have decals for UNITWIN 15 and 10 ( small red decal at front of engine) SuperSingle decal set and early Pilot decal set. I have few left but get new patch of Pilot decals during couple of weeks. Price? same as i pay for printer my selves. Spark plug cover (UNITWIN) is now in place. My friend have recast couple of them some time ago for me. I dont know if he is still willing to cast them more.
Regards Olli Finland

[AusAnzani]

Hello Olli,

It was me (AusAnzani) who was asking about decals and parts for Anzani outboards. Please send me a list of what you have available and the prices by private message.

By the way I have seen pictures of your Anzani collection on another website previously. They are absolutely beautiful. Your workmanship is fantastic. You should be very proud.

Regards
Spiro

[AusAnzani]

Double post removed.

[ovuorile]

Britannia decals also available. After many years Britannia is running at last. Had ingnition isue but coil specialist here in Finnland remade it. Runs great now!
cheers
Olli

[AusAnzani]

Absolutely beautiful.

Olli, I will respond to your pm tomorrow. I an using my smart phone at the moment and the battery is almost flat.

Thanks again
Spiro

[notav8]

Fabulous Britannia. I hope to get my one looking like that one day.

[ovuorile]

Thanks for comments!
Cheers
Olli

[kees]

.
Hi Olli

my compliments for these decals, a very good job !

my question is ; Are you willing to sell two sets to a collector in the Netherlands ?
two for the "Pilot" and
two for the "Super Single" model

hear from you ?

regards, Kees
.

[kees]

Hi Boyd,
Do You mean these decals. I have remade them from original tank decals by my fried how have bussines to do these things. I have decals for UNITWIN 15 and 10 ( small red decal at front of engine) SuperSingle decal set and early Pilot decal set. I have few left but get new patch of Pilot decals during couple of weeks. Price? same as i pay for printer my selves. Spark plug cover (UNITWIN) is now in place. My friend have recast couple of them some time ago for me. I dont know if he is still willing to cast them more.
Regards Olli Finland
DSCN1561.JPGDSCN1568.JPGDSCN1565.JPGDSCN1563.JPG

Hi Olli

my compliments for these decals, a very good job !

my question is ; Are you willing to sell two sets to a collector in the Netherlands ?
two for the "Pilot" and
two for the "Super Single" model

hear from you ?

regards, Kees

[ovuorile]

I have sent PM to you Kees.
Olli