20 foot race boat (NZ)
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
- Chilli Dog
- Posts: 394
- Joined: Mon Jun 18, 2012 8:16 am
- Location: New Zealand
Re: 20 foot race boat (NZ)
I tested with a 2hp yamaha today , not as fast as my silver century . but smooth , quiet and smoke free and light , did I say easy to start . hah , who would have one ?
Chilli Dog Racing
Re: 20 foot race boat (NZ)
I still rate the hard chine concept. A bendy ply boat is pretty good, but they need to be wide to generate the lift. I think the Chilly Dog boat is wide enough to pull it off, but our first bendy ply boat 'Paris Hilton' was narrow-ish had some problems with trim and weight carrying ability.
I'd like to refine the hard chine concept with a properly moulded boat, but that's expensive and time consuming. So will probably run 'Paris Mk2' down the Waikato again next year. There will be a couple of ply versions of her out soon, so will be interesting to see how they shape up.
I'd like to refine the hard chine concept with a properly moulded boat, but that's expensive and time consuming. So will probably run 'Paris Mk2' down the Waikato again next year. There will be a couple of ply versions of her out soon, so will be interesting to see how they shape up.
- Chilli Dog
- Posts: 394
- Joined: Mon Jun 18, 2012 8:16 am
- Location: New Zealand
Re: 20 foot race boat (NZ)
turned her over and smoothed out the bottom some what this week .
was a rushed rough job first up !
was a rushed rough job first up !
Chilli Dog Racing
- Collector Inspector
- Posts: 4196
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: 20 foot race boat (NZ)
Good to see Ya again Mate!
B
B
A chicken is one egg's way of becoming others
- The Tinker
- Posts: 283
- Joined: Mon Dec 27, 2010 9:18 am
- Location: Whangamata, New Zealand
Re: 20 foot race boat (NZ)
Hi Chris, I been trying to lobby the twenty foot class is just that 20 ft no less no more + or - 1ft maybe.
Re: 20 foot race boat (NZ)
I think it should be 20ft +/- an inch max. I reckon anyway.