Keith P, Thats it at 55 seconds and what a neat collection.
Charles uk, I don't think the carb is original as it has a cable opperated choke,
probably came off a Japanese scooter. I agree its not English the quality of the
leg doesn't match the tinware on the motor. Will check the threads tomorrow.
The carb is wrong, should be Australian Norson, Amal made under licence Sydney. The recoil is wrong.............they were unique to that power head and first thing to stuff up........................tin housing went straight to rust heaven when first time wet.
The fuel tap/filter is correct. Also used on Olympic, Riverside and the recoil version of the Riptide Fisherman.
Power head was a commercial australian air cooled engine, never used on a lawnmower. Mainly agricultural spraying and pumping equipment. Supplied by McPherson Supply ( I think) all states Aus up to 1961.
4Hp at crankshaft
Rest of it is home grown foundry works eastern states. Transom mounts and gearbox internals were used on other makes over time.
Heavy and robust in their day.
Bondage shackles and Redbacks were an option.
Email is back.
The youtube vid and, alectraproject You Tube, is mine....................
You just edumacated me with the pathfinder mower! Myres was, originally, a Perth only concern back then. They sold the Waterboy outboard motor locally as well.
Thanks for that!
Give it a cobweb brush off, a dose of Mortein, clean the points to 0.014", whack in a plug and test spark, offer some 16:1 air cooled motor two stroke mix and tell us what happens!
The carb on it looks like the mower one but I have a doubt as to originality. May have been a known replacement but looks too modern. Never mind, I have added to documentation for further attention.
The carb on yours has still got the flag type governer so definitely a ring in. It should still work well enough to test fire the Old Bloke Aye!
Could you indicate if the victa recoil start actually works, how it was fitted if it dose?