Deglazing the sleeve on 40+, is it necessary?
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
Deglazing the sleeve on 40+, is it necessary?
Do I have to deglaze the piston sleeve before assembly, I am using the original rings.
Re: Deglazing the sleeve on 40+, is it necessary?
Nautinunu
I would re-hone the bore
Would also check the end gap on the rings before re-using them. My rule of thumb on a seagull is 8-thou max end gap. Any greater & I'd toss them.
Rex
I would re-hone the bore
Would also check the end gap on the rings before re-using them. My rule of thumb on a seagull is 8-thou max end gap. Any greater & I'd toss them.
Rex