Removal of stuck woodruff key

[john hartnett]

Replacing a crankshaft on an EFPC and of all things I can't seem to pop the woodruff key out of the slot. Remarkably stiff. Any good tricks to accomplish this would be appreciated.
Thanks

[Collector Inspector]

1st thing, do not use a gripping tool on it as it will be rendered unservicible for later use.

Small screwdriver into slot, under key in crank slot. Give it a tap with a hammer into and under, it will move.

Same small driver then gently gently lever out of the keyway, you will see it moving/rotating outwards from that end that you are working on.

Gently gently, it will "Rotate Out"

B