Saving Old Seagulls

Nudge wrote:OK I wont ask then. we have all had days like that.

thank'you for your comprehension, I 'm buying a new bracket.

Nudge wrote:How the hang did you do that?
If it where me I would find another... or at least get it welded up.

Try cleaning the jets in the carb again.

If I tell you how I cracked it, you will think I'm stupid, the same I felt when I did it.

I received a new genuine fuel line, now it matches the fuel tap. The two connector are of different sizes.
Now I solved the problem because the engine accelerates but I got the opposite problem, the engine is weak at slow speed, it misfires and stops when I clutch the propeller. I suppose there is ...

Out of curiosity, where did you get the fuel tap from? Anyway, you now need to get a correct fuel line also. Then you will n

Know you have no fuel restrictions. Have you cleaned the tank out also?
I got the fuel tap from Jon of saving old seagull.
I cleaned also the fuel tank,
I bought another ...

Charles uk wrote:What does it say on the propeller hub?

It is written 102.

Here is the original fuel tap which does'nt match the fuel line connector.

Finally I got pictures, here is my actual set up which has got a not original fuel tap, than I purchased in UK a used original fuel tap which doesn't match the fuel line connector.

Charles uk wrote:What does it say on the propeller hub?

sorry I don't understand the meaning

For me it's enough to know if you remember if the original fuel line has got a connector to tap smaller than to the carb one, because mine which have been modify has got the same size on both sides.

For me it's enough to know if you remember if the original fuel line has got a connector to tap smaller than to the carb one, because mine which have been modify has got the same size on both sides.

I've cleaned the jets and filter, also the original fuel tap arrived, but it doesn't match with my fuel line connector, the fuel tap is 11 mm male and the fuel line has got 13 mm female connector. Any suggestion? Is the original fuel line 13 mm (1/2 inch) at the carburetor link and 11 mm at the fuel ...

Engine is 102 TC80928L, with Amal Twin jet, the propeller is in the picture attached. Fuel tap and fuel line are not original,I'm waiting for the parts I bought to replace them. Is it possible to remove the jets without the proper tool?

Hello, my 102 with Amal two jets runs smoothly up to half throttle, if I accelerate it does for a while than it reduces speed and power , to avoid it stops I have to reduce throttle, than it runs smoothly at reduced speed. I checked the fuel line and fuel arrives properly to the carb, therefore I ...

sorry by mistake i posted a wrong picture which has nothing to do with the issue

Keith.P wrote:The right part.

http://www.ebay.co.uk/itm/BRITISH-SEAGU ... Swv0tVB1Ol

Thank'you, actually this part is missing to me, i got a crome collar which I thought it was original.