Search found 8 matches

by Blue Marlin
Sat Aug 17, 2013 10:00 am
Forum: General Topics
Topic: Slipping throttle
Replies: 3
Views: 4609

Re: Slipping throttle

Thanks, H-A, easy when you know how!
by Blue Marlin
Wed Aug 14, 2013 7:04 pm
Forum: General Topics
Topic: Slipping throttle
Replies: 3
Views: 4609

Slipping throttle

Hi,I'm hoping someone can help me with my Silver Century, which I purchased as a non-runner recently. I took her out for a spin on the back of a dinghy and everything was fine except I have to hold the throttle lever in place otherwise it slips back and either slows or stops.Any suggestions, please?
by Blue Marlin
Sun Jul 14, 2013 5:36 pm
Forum: General Topics
Topic: Newby needing suggestions on getting Seagull started
Replies: 33
Views: 33683

Re: Newby needing suggestions on getting Seagull started

Eventually worked out where the water inlets are - gave it a good flush again from both directions and water is coming through, not much on low revs but plenty on high revs. Is that usual or is it ok to have a small flow? Next step is to try it on the back of the inflatable - maybe next weekend. She ...
by Blue Marlin
Sun Jul 14, 2013 4:51 pm
Forum: General Topics
Topic: Newby needing suggestions on getting Seagull started
Replies: 33
Views: 33683

Re: Newby needing suggestions on getting Seagull started

With the outboard now running, I thought I would check her out in a wheelie bin with plenty of water, but noticed no water was coming from the tell tale. I tried flushing water down the tell tale but this has made no difference. I've read a few posts suggesting trying to clear the water way with ...
by Blue Marlin
Fri Jul 12, 2013 2:36 pm
Forum: General Topics
Topic: Newby needing suggestions on getting Seagull started
Replies: 33
Views: 33683

Re: Newby needing suggestions on getting Seagull started

I took your advice and cleaned out the filter - full of a creamy paste - and fired WD40 through jets. started first time!

The outboard is quite loud - is that usual?

I placed the outboard in a bucket (see picture), water went everywhere! How high up the tube should the water level be?

Thanks for ...
by Blue Marlin
Mon Jul 08, 2013 6:17 pm
Forum: General Topics
Topic: Newby needing suggestions on getting Seagull started
Replies: 33
Views: 33683

Re: Newby needing suggestions on getting Seagull started

Thanks for the suggestions - I didn't have time to look at the Seagull today because I've been finishing off the anti-fouling and then it's back to work, so I'm hoping to try again at the weekend - I'll let you know the progress and try to include some pictures, although she's not the prettiest ...
by Blue Marlin
Sun Jul 07, 2013 9:03 pm
Forum: General Topics
Topic: Newby needing suggestions on getting Seagull started
Replies: 33
Views: 33683

Re: Newby needing suggestions on getting Seagull started

Sorry, forgot to mention, according to the serial number it is a 1976 Silver Century Amal 2 jet carb.
by Blue Marlin
Sun Jul 07, 2013 9:00 pm
Forum: General Topics
Topic: Newby needing suggestions on getting Seagull started
Replies: 33
Views: 33683

Newby needing suggestions on getting Seagull started

I have no experience of Seagulls, having Yamaha on my boat. However, I have just purchased an inflatable dinghy and the seller also had a Seagull for sale, so thought I would give it a try. Having started looking through the web, I am now quite taken by the Seagull and would like to get it running ...