Page 1 of 1
102 tank and fitting
Posted: Tue Jan 22, 2019 12:35 pm
by Wayne1
Hi all, has anyone got a 102 tank as I am partway through a resto and nothing on Evilbay for sometime now.........
Fingers crossed that I dont have to use a late one !
Cheers Wayne 07941931827
Re: 102 tank and fitting
Posted: Tue Jan 22, 2019 12:40 pm
by Oyster 49
Have you contacted John Williams at SOS?
Re: 102 tank and fitting
Posted: Tue Jan 22, 2019 7:52 pm
by fleetingcontact
I have a steel tank but no bayonet cap so it is unlikely I will use it. The tank was a bit rusty but I've scrubbed it clean and it seems solid. Also have the earlier ally supports.
Re: 102 tank and fitting
Posted: Tue Jan 22, 2019 8:16 pm
by Hugz
fleetingcontact wrote:I have a steel tank but no bayonet cap so it is unlikely I will use it. The tank was a bit rusty but I've scrubbed it clean and it seems solid. Also have the earlier ally supports.
Oooh, l'm after one of those if Wayne doesn't require the early steel one.
Re: 102 tank and fitting
Posted: Tue Jan 22, 2019 10:42 pm
by fleetingcontact
Sold to the Aussie. Arm hanging by a tendon.
Re: 102 tank and fitting
Posted: Tue Jan 22, 2019 10:57 pm
by Hugz
persuasive.....
Re: 102 tank and fitting
Posted: Thu Jan 24, 2019 5:42 am
by AusAnzani
Got to be quick 'round here lol
Re: 102 tank and fitting
Posted: Thu Jan 24, 2019 8:37 am
by Hugz
Then you would need two bayonet caps!
Re: 102 tank and fitting
Posted: Thu Jan 24, 2019 11:31 pm
by AusAnzani
Hugz wrote:Then you would need two bayonet caps!
No, I still only need one for the SD.
I do have one from a Britannia that I can use for the moment. The only external difference is that it is scripted with fuel/oil mix information.