Page 1 of 1
Need Bolt-on Transom Bracket for Century.
Posted: Tue Aug 28, 2018 12:09 pm
by Journeyman
Hi all, this is for my 1957 Century, it’s easier to leave the bracket on the boat and use the Pin to move the motor from the tender to the boat so I need a second bracket..
Dave.
Re: Need Bolt-on Transom Bracket for Century.
Posted: Tue Aug 28, 2018 9:56 pm
by Charles uk
Nylon or Bronze?
Re: Need Bolt-on Transom Bracket for Century.
Posted: Tue Aug 28, 2018 10:21 pm
by Oyster 49
Don’t all the century/102s have the holes in the alloy bracket? Just remove the clamps?
Re: Need Bolt-on Transom Bracket for Century.
Posted: Tue Aug 28, 2018 10:29 pm
by Journeyman
Hi Charles, the present one is a mixture of aluminium and bronze no nylon, what I’m looking for is the whole Bracket frame that will be permanently bolted on too the transom.
Am I right that the bracket usually includes the tilt mechanism and a lock for the drive shaft and some of those locks are nylon. I’d prefer the bronze if there is a chose.
Thanks Oyster I’m looking for a second bracket and thought they made some without the clamps.
Of cause if one is not availably I can always remove the clamps from a full one.
Dave.
Re: Need Bolt-on Transom Bracket for Century.
Posted: Sat Sep 01, 2018 5:23 pm
by tambikeboy
Any good china....
Re: Need Bolt-on Transom Bracket for Century.
Posted: Sun Sep 02, 2018 7:41 am
by Journeyman
Looks just the thing, don't suppose you have the lower leg locking devise as well?
Dave.
Re: Need Bolt-on Transom Bracket for Century.
Posted: Sun Sep 02, 2018 9:01 am
by tambikeboy
That's all I have sorry......
Re: Need Bolt-on Transom Bracket for Century.
Posted: Mon Sep 03, 2018 10:38 am
by Nudge
I cant say I have seen one like that before. I quite like it!
Re: Need Bolt-on Transom Bracket for Century.
Posted: Mon Sep 03, 2018 4:11 pm
by Journeyman
Hi All,
Just to let you know I’ve bought the one from Tam so will eventually be looking for a lower Trunnion-Lock.
Thanks to all who contributed to the thread.
Dave.