Hello everyone,
Can somebody please tell me the thread size for a silver century clutch stud so that i can order a tap?
Cheers, Jacob
Clutch stud thread size
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
- seagull101
- Posts: 405
- Joined: Mon Jan 23, 2017 10:30 pm
- Location: Scottish islands
-
- Posts: 164
- Joined: Thu May 01, 2014 11:09 am
- Location: Donegal
Re: Clutch stud thread size
viewtopic.php?f=2&t=6040
A very good post by Nudge.
A very good post by Nudge.
- seagull101
- Posts: 405
- Joined: Mon Jan 23, 2017 10:30 pm
- Location: Scottish islands
Re: Clutch stud thread size
Either I'm blind or its not there!
- fleetingcontact
- Posts: 275
- Joined: Sat Aug 15, 2015 6:47 pm
- Location:
Re: Clutch stud thread size
You're not blind, it's not here despite recent claims to the contrary. Hole is 3/8" on all models prior to FNR models with the thicker driveshaft tube. There is a chart somewhere on the web which tells you the correct size drill to use prior to tapping, but Charles reckons a 8.5mm bit will do it and I expect in this he is right.
I think I said 8.25mm
Charles
I think I said 8.25mm
Charles
Re: Clutch stud thread size
Same as a tiller stud.