Page 1 of 1
Victa Jet - started today and it runs!
Posted: Sun Sep 11, 2016 12:58 pm
by Twinkles031
Hi all,
Thought I would post up some pics of my victa jet that I recently finished restoring. Being an avid lawnmower and chainsaw collector, I was extremely happy to find one of these jet outboard locally. Although the old owner wasn't able to start it when I picked it up, he assured me that he had it running in the past, so I took a gamble and grab it. I actually finished restoring this a couple of months ago but haven't had a chance to fire it up untill today, so was extremely pleased when it fired into life and ran like a champ from idle to full throttle!
Anyway, a couple of pics below. Will try and get my other new outboard (37 evinrude sportsman) up this week once I put that in the tank and fire that one up too.

Re: Victa Jet - started today and it runs!
Posted: Sun Sep 11, 2016 9:53 pm
by Nudge
Very nice, looks like it is fresh out of the box!

Re: Victa Jet - started today and it runs!
Posted: Mon Sep 12, 2016 12:20 am
by AusOB_Collector
Nice job Anthony!
Did you get the decals printed yourself?
Cheers
BP
Re: Victa Jet - started today and it runs!
Posted: Mon Sep 12, 2016 3:04 am
by Twinkles031
Thanks guys,
Hey Boyd, no i got the decals from this bloke on Ebay
http://www.ebay.com.au/itm/Victa-JET-Vi ... Sw0JpV4c~f
I have used his decals in the past on various mower builds, and have been very happy with the quality of the stickers. To be honest i only actually used a couple of the decals in the pack, the rest are originals i was able to clean up to look like new!
The only bit I am not 100% happy with at the moment is a small crack in the very top cover in front of the pull start. Will keep my eyes open for a replacement in the future but finding a mint one is going to be a big ask.
I also picked up another little 40 seagull the other day, so once i finish the 50s model Homelite saw i'm on at the moment that will be the next one on the bench!
Re: Victa Jet - started today and it runs!
Posted: Mon Sep 12, 2016 1:24 pm
by AusOB_Collector
by Twinkles031
The only bit I am not 100% happy with at the moment is a small crack in the very top cover in front of the pull start. Will keep my eyes open for a replacement in the future but finding a mint one is going to be a big ask.
One of my friends in Mandurah may possibly have one of those plastic covers without any cracks; i'll contact him tomorrow to check and will let you know.
Does your '37 Sportsman have a recoil start or is it a rope start?
Cheers
BP
Re: Victa Jet - started today and it runs!
Posted: Tue Sep 13, 2016 2:56 am
by AusAnzani
Great job on the resto Anthony. It's got to be the nicest Victa Jet I've seen so far.
Well done!
BTW, If you come unstuck in your search for a replacement cowl, register at Vintagemowers.net/forum and/or Outdoorking.com/forum. The guys at both are very helpful.
Regards,
Spiro
Re: Victa Jet - started today and it runs!
Posted: Wed Sep 14, 2016 9:56 am
by Twinkles031
Thanks Boyd, that would be great!
The Sportsman's (i I have the complete one and then a parts one) are both rope start models.
And Thanks Spiro, I am really pleased with it! I wish i had of had the for thought to get a before photo, but i am a bit excitable when i actually get time to work on my motors so pretty much had it all stripped before i thought of it!
I am registered at vintagemowers.net, and have found some great info on there in the past, will look into outdoorking though!
Re: Victa Jet - started today and it runs!
Posted: Wed Sep 14, 2016 10:36 am
by Collector Inspector
I like what you have done with the jet.....
Nice as well that it runs nicely as one in good nick does.
Put it on a transom and report back to us how it actually goes aye?
I have a new one and one other that I have actually tried out, a transom test so to speak.
Could you do that test for us sometime? I will mark you out of 10 as to your trial.....
I think that every serious AU collector has to have one for basic cred from their peers. Seriously!
Good work.
BnC
Re: Victa Jet - started today and it runs!
Posted: Thu Sep 15, 2016 2:02 am
by AusAnzani
Collector Inspector wrote:
I think that every serious AU collector has to have one for basic cred from their peers. Seriously!
BnC
Not sure that I agree with you on that B. Yes, the Victa Jet is part of our local outboarding history, but to suggest that any Aussie Collector who doesn't have one lacks basic cred is bit difficult to accept.
Re: Victa Jet - started today and it runs!
Posted: Fri Sep 16, 2016 11:46 am
by Twinkles031
Re: Victa Jet - started today and it runs!
Posted: Fri Sep 16, 2016 12:49 pm
by Twinkles031
For those that want to add one to their collection.
https://www.ebay.com.au/itm/262588406080
Re: Victa Jet - started today and it runs!
Posted: Sat Sep 17, 2016 9:44 am
by notav8
Nice job on the restos .
It good to run them in a tank, and see and hear them running as they were supposed to.
Thats part of the reward, for all the time and effort.
look forward to seeing more of them.
Cheers