marston flywheel pukker
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
marston flywheel pukker
Hello I am looking for a marston flywheel puller tool,to purchase or loan
Re: marston flywheel PULLER
Not a Pukker ,but a puller ,John at sos ,says he has sold out
- Charles uk
- Posts: 4955
- Joined: Wed Feb 27, 2008 4:38 pm
- Location: Maidenhead Berks UK
Re: marston flywheel pukker
Where do you live Bob?
Make it idiot proof and someone will make a better idiot.
Re: marston flywheel puller
Hello I live in somerset ,
Re: marston flywheel puller threads
Does anyone know the internal thread on a marston flywheel,it measures about 29 mm,but in 1946 ,i think marston used whitworth or some other english thread
-
- Posts: 758
- Joined: Wed Apr 16, 2014 7:58 am
- Location: Tasmania, Australia
Re: marston flywheel pukker
it is not a standard thread; TPI 16; min dia 1.055" standard BSF thread form but recheck before cutting..
AJ
AJ
- Charles uk
- Posts: 4955
- Joined: Wed Feb 27, 2008 4:38 pm
- Location: Maidenhead Berks UK
Re: marston flywheel pukker
But please remember the most important detail, it's a left handed thread!
As it happens it's an 1 &1/8" x 16 TPI left hand thread.
As it happens it's an 1 &1/8" x 16 TPI left hand thread.
Make it idiot proof and someone will make a better idiot.
Re: marston flywheel puller
hello many thanks to both of you,for the information,now the quest begins to find ,a old school engineering workshop,that has the skills to make one