Saving Old Seagulls

Anybody got any useful tips on how to remove the two slot head bolts? Have sprayed with loads of WD40 but they just won't budge.

As stelios will say heat is your best pal and plenty of it

Will give it a try, anything in the vicinity I should look out for, don't want to cause more damage?

A plastic impeller is hiding inside, may or may not be effected by the heat, never have to go further then an impact driver myself.

bikerboyfife wrote:As stelios will say heat is your best pal and plenty of it

Indeed

And while reaching a top temperature, submerge it. Repeat those cycles, and in the end while hot, say 50% of the top temp, try to remove them.

Thanks guys will give the impact driver a go first i think, thanks very much for all your help, will let you know how i get on.