British Anzani 1.5 Pilot thread size

Cheshire Cat 4 · Post by **Cheshire Cat 4** » Tue Mar 20, 2012 9:56 pm

Can anybody tell me the thread & size of the flywheel nut on an Anzani 1.5 Pilot
I am trying to help a friend in Finland to rebuild one of these and the nut has gone
AWOL

Hugz · Post by **Hugz** » Wed Mar 21, 2012 12:45 am

My Pilots don't have a nut. Must be a different model.

StephenRT · Post by **StephenRT** » Wed Mar 21, 2012 9:22 am

Removal of the starting pulley will reveal the flywheel nut which on my Pilot is 7/16 BSF.

Hope this helps.

Steve

Cheshire Cat 4 · Post by **Cheshire Cat 4** » Wed Mar 21, 2012 7:28 pm

Thanks Steve,
Is the 7/16" BSF nut in question just an ordinary flat nut or is it shaped in any way

Horsley-Anarak · Post by **Horsley-Anarak** » Wed Mar 21, 2012 8:24 pm

Cheshire Cat 4 wrote:just an ordinary flat nut or is it shaped in any way

Dug out my pilot, removed rope pull, removed nut.

0.07075" AF

0.3795 Thick.

7/16" BSF 18 TPI

If you need additional pictures give me a shout.

H-A

Cheshire Cat 4 · Post by **Cheshire Cat 4** » Wed Mar 21, 2012 9:46 pm

Thank you H-A you are a star
Many thanks indeed
Ken.

Saving Old Seagulls

British Anzani 1.5 Pilot thread size

British Anzani 1.5 Pilot thread size

Re: British Anzani 1.5 Pilot thread size

Re: British Anzani 1.5 Pilot thread size

Re: British Anzani 1.5 Pilot thread size

Re: British Anzani 1.5 Pilot thread size

Re: British Anzani 1.5 Pilot thread size