Saving Old Seagulls

I recently located 10 working Villiers Mk 1 Ignition Coils (Seagull part number M1634), as they are getting so scarce I bought all the guy's stock that tested good/working, but now I have only 2 left from the 7 that I didn't need.
Some of them have the cheeks ready fitted & most have the Villiers label on them

So if anyone needs a working Villiers coil, Email me & they can be yours for £15.00 each + postage at cost, & say if you want the cheeks as well.

As soon as I've shipped one & know the postage I'll put it on here.

Postage 1st class UK without cheeks £1.96
with cheeks £2.48

Thanks very much for the coil. Now I have to find another 102 to fit it on to

Hello, do you still have any Villiers coils for sale?

Would it fit a 40 featherweight?

Many thanks

Tim

We recently started working on a 40 minus SJM 12894 and it looks like it needs a new coil. I came across your post and was wondering if you still had one.

Thank You

The coil on my LLS gave up and died. Reading on multimeter was through the roof. No spark. Had to drill out the slotted screws but two nuts together and the plug lead clip screws came out easy. Thanks to your coil I will soon be back on the water. Long range fuel tank (steel) was going rusty again after just two season - now has a standard brass tank and looks better for it. Just waiting for replacement screws from George - villiers parts.

And hows the Marston coming along on Skye?

Very slowly. Still got an Anzani to play with first after getting all my other seagulls going again.

Ok Come on Man Get on with it...or sell it back to me