Page 1 of 1

Stuff

Posted: Mon Oct 31, 2011 10:25 am
by RickUK
Well - not for sale really - free parts:

A Forty Plus powerhead - FP224E9 -crankcase, cylinder, crank and piston, head and Wipac magneto flywheel and backplate, with drive tube and chromed exhaust tube. Stiff to turn over, but uniform throughout a rotation, so I would believe the crank is not bent.

A powerhead pretty much as above - FP 2087C0 - spins over freely - drivetube is rusty but not pitted - aluminium exhaust tube in good condition.

A crankcase and crank, with Villiers magneto backplate - SJP20009L

Two steel petrol tanks - little or no rust internally, no dents, but one pushed in slightly on base - both have mounting brackets.

Two - 4:1 gearboxes with 5 blade Hydrofans in good condition, and with disengagement yokes. Gears in one of them good - other one unknown.

One Forty Plus gearbox and waterpump housing - gears reasonable/useable.

Don't want to post these parts particularly, but if distance is a problem, will post at cost, though the tanks might be a worry. Otherwise, collect from Huntingdon or meet up at a reasonable distance..


Rick.

Re: Stuff

Posted: Mon Oct 31, 2011 11:31 pm
by mjn321
Do you happen to have a throttle control (40+) amongst you parts ?
Thanks..
Malcolm

Re: Stuff

Posted: Tue Nov 01, 2011 1:52 am
by fastjedi
You have 2 PMs re tank

Re: Stuff

Posted: Tue Nov 01, 2011 9:24 am
by RickUK
For Maloclm - I don't have a throttle lever amongst the freebies, but I'll have a look to see if I have one about.

For fastjedi - no messages in my pm's - we were haeving 'puter problems yesterday ( and may still have today) - try my email -rjones at remchem dot com.

Rick.

Re: Stuff

Posted: Tue Nov 01, 2011 10:45 am
by electrosys
Hello Rick

PM (and email, just in case) sent re: powerheads.

Colin

Re: Stuff

Posted: Sun Nov 06, 2011 9:34 pm
by electrosys
Many thanks Rick, for the powerheads - appreciated. And it was a pleasure meeting you earlier today.
Colin

Re: Stuff

Posted: Mon Nov 07, 2011 9:59 am
by RickUK
A pleasure Colin. Watch this space - when I get around to it, I should be taking more weight off my shelves!

Rick