Page 1 of 1
gasket,s
Posted: Mon Jan 24, 2011 9:11 pm
by WULLIE195
hi guy,s would like to try making up my own gasket,s for my 40+carb/gearbox and most washer,s any suggestion,s would be smashing or should i just buy them want to experament many thank,s
Re: gasket,s
Posted: Mon Jan 24, 2011 9:36 pm
by Keith.P
You are only going to need to replace a gasket once, so best to use the right ones.
Give John a ring at the top of the page, he has all the gaskets you need.
Re: gasket,s
Posted: Mon Jan 24, 2011 9:53 pm
by cahillp3
http://www.saving-old-seagulls.co.uk/fo ... f=5&t=2088
Just one for the gearbox. a little satisfying doing your own but the rest are fibre and better buying em from john
Re: gasket,s
Posted: Mon Jan 24, 2011 9:58 pm
by WULLIE195
THANK,S GUY,S JUST AS I THOUGHT WILL GET FROM JOHN
MANY THANK,S
Re: gasket,s
Posted: Mon Jan 24, 2011 9:59 pm
by Horsley-Anarak
Find some paper or thin card that is the correct thickness, then just cut them out.
A small set of punches will make it a little easier.
Most if not all seagull gaskets are not very highly stressed, so as long as the paper is the correct thickness then you should have no problem.
H-A