Saving Old Seagulls

Well the australian guru Inspector collector is at his shack celebrating his ** th birthday so no information there ...

Will the century 100 carb ( 67-73 quoted ) I have just bought on ebay for more money than I paid for the whole AD fit the AD ....seem to recolect something about 16 mm and 18mm spigots ......get the lathe going ??? Any other problems ??? Hope she does not cry when I take the suzuki carb off ......

Yes it'll fit. The smaller spigots sometimes found on Century blocks are for the (non-'Silver') models with a Villiers carb.

No she won't cry when you remove the carburettor from some Johnny Foreigner factory; she'll smile and regain her composure.

Bit like when the Sheilas repair their blotchy eyeshadow, you know, they get their confidence back.

Good luck.

charlesp wrote:Yes it'll fit.

Err.......... I must be missing something. ........

My answer would have been "Not possible unless you are a Pongo, or your favourite tool is a Manchester screwdriver"

Peter

Thank you, 40TPI, you are of course correct.

The carb you've bought is a Villiers, isn't it? My mistake, and if so no it won't fit.

I promise to read posts properly before replying...
I promise to read posts properly before replying...
I promise to read posts properly before replying...
I promise to read posts properly before replying...
I promise to read posts properly before replying...
I promise to read posts properly before replying...I promise to read posts properly before replying...
etc etc etc

What is a Pongo? International language differential I expect. Congratulations are in order on your successful win of the Dart championship!

Cheers Hugo.

The British Army squadie is famously known among military equipment suppliers for being able to incorrectly assemble or otherwise wreck any piece of kit entrusted to his care............he is 'affectionately' known by his colleagues in the other services as a Pongo on the basis that wherever the army goes the pong (smell) goes......


Peter

oh well we have a useless 20 quid carb ......so in what respect wont it fit ?? whats its spigot diameter ? too big or too small ?
Seems to have a clamp on the outlet ...or is it the fuel ratio/jet/needle thats a problem?

I'm assuming that it is a villiers which have a narrower spigot connection than the amal. I'm sure you could turn up a reducer tho it would extend further out which could affect performance.

Flippin eck buy the proper carb wont you!
If you have the villiers sell it!
and buy an amal!
really is no way to treat a 102
tut tut
i probably have one if you want........

well you are right it will not fit though an adaptor would be easy to make and not reduce the throat diameter . Have put it back on e bay minus the thumb throttle as I needed on of those too
Have been looking for the right carb for about 12 months without luck but have found a new replica of the Amal and will engineer a mount for it .
thanks for all your help ..

Can't you buy the correct one from John? He must have lots of them. You would have it by next week.