Page 2 of 3

Re: Aluminium G clamp Transom Bracket

Posted: Sun Dec 04, 2016 1:08 am
by Keith.P
No point putting up a stainless one.
The problem with the cast ones is, they can be very loose fitting, whereas the modern stainless ones can be a pain to get out.

P4232529A.jpg
IMG_0478A.jpg
Are you saying the aluminium G clamps have ST 1326-9T on them like the early bronze ones, or that they just have the same part number?

Re: Aluminium G clamp Transom Bracket

Posted: Sun Dec 04, 2016 1:16 am
by flyguy
Charles uk wrote:All the calculations that we've done in the past were based on the National Average Income, the most expensive that I've found for a small Seagull was the Marston OA at 14 weeks NAI in 1933, the FNR Marstons were 6 to 8 weeks dearer, but they didn't sell too many of those, after that they just got cheaper, in 1993 the top of the range was a Kingfisher which cost less than 10 weeks NAI.

Perhaps I didn't express myself very well Jon, the last of the Seagull transom bracket, to have the L shaped transom screw was the grooved bronze G cramp with ST 1326-9T cast on it, sorry I thought it was clear that the skeletal & the Ali G also had them.

You've got a lot more to get Hugo, side mount, brass bolt on 40, nylon & brass bolt on century, Mercury style curlew, Kingfisher.
At least you won't have to worry about starting them.

side mounts on ebay at the moment
http://www.ebay.co.uk/itm/rare-Vintage- ... SwIgNXnJHZ

Re: Aluminium G clamp Transom Bracket

Posted: Sun Dec 04, 2016 2:16 am
by Charles uk
That's only half of one, I've got three quarters of one, not that you'd ever use it.

Another bit of rubbish I collected while researching bloody Seagull products.

Re: Aluminium G clamp Transom Bracket

Posted: Sun Dec 04, 2016 2:25 pm
by headdownarseup
That's half the trouble with collecting is knowing when to stop...
Otherwise you end up with drawers full of old junk that's either incomplete, worthless,or at the opposite end of the scale almost priceless with only a very few select people around the world that would know what it is and to anybody else would think it was another bit of old junk.


I'm seeing quite a lot of this recently on ebay with various items for sale listed as vintage or rare with a price tag to match. I guess its that time of year again.

Jon

Re: Aluminium G clamp Transom Bracket

Posted: Sun Dec 04, 2016 2:30 pm
by Keith.P
I totally agree with that, it maybe rare, but useless to most people, or just junk.
Otherwise you end up with drawers full of old junk
You reading this Charles. :lol:

Re: Aluminium G clamp Transom Bracket

Posted: Sun Dec 04, 2016 2:32 pm
by Charles uk
NO!

Re: Aluminium G clamp Transom Bracket

Posted: Mon Dec 05, 2016 12:15 pm
by Collector Inspector
I for one have ........."a lot of said junk"

Not just BS

BnC

Re: Aluminium G clamp Transom Bracket

Posted: Mon Dec 05, 2016 8:56 pm
by headdownarseup
If said "junk" has some use down the line or a purpose in the near future then it's not JUNK. It's collectable "STUFF"
It's only junk when nobody wants it, or it's the same as what everyone else is trying to sell at highly elevated prices.

It's worth what an enthusiast is willing to pay for it.
Whatever that might be...


I too have drawers with "stuff" in them. :roll:


Jon

Re: Aluminium G clamp Transom Bracket

Posted: Mon Dec 05, 2016 9:17 pm
by Keith.P
One man's junk is another man's treasure.

If a non outboard person looked in my shed,I know what word he would be thinking.
I don't like anyone looking in my drawers.

Re: Aluminium G clamp Transom Bracket

Posted: Mon Dec 05, 2016 9:50 pm
by tambikeboy
:lol:

Re: Aluminium G clamp Transom Bracket

Posted: Mon Dec 05, 2016 10:02 pm
by Charles uk
Your wife explained the cause of your embarrassment Keith!

Re: Aluminium G clamp Transom Bracket

Posted: Mon Dec 05, 2016 10:25 pm
by Keith.P
oops. :oops:

Re: Aluminium G clamp Transom Bracket

Posted: Tue Dec 06, 2016 9:00 am
by JERSEYMAN
One thing about the side mounts, who the hell would drill a hole in the side of their boat to actually fit one???

Re: Aluminium G clamp Transom Bracket

Posted: Tue Dec 06, 2016 12:30 pm
by Charles uk
I've just found my Ali G, Keith, no part numbers on the G's, can you post a pic of yours Jon, so I can see where it was, to see if my G's are the same as yours & the if number has been removed.

Re: Aluminium G clamp Transom Bracket

Posted: Thu Dec 14, 2017 2:36 pm
by Piglola123
Are these the same ali g clamp transom you are discussing