Page 2 of 2

Re: 1967 Century Rebuild

Posted: Sun Dec 09, 2012 8:14 am
by Stelios_Rjk
Good mornig,

About tensions http://www.classicseagulls.co.uk/index. ... y&cat_id=5

Could you give some info about powder primer? I didn't new that there is such thing.

Re: 1967 Century Rebuild

Posted: Mon Dec 10, 2012 12:45 am
by croweater
Thanks for the link some good information there.

I used the powder primer because I had access to it (cheap), it’s not available to the general public we
use a grey and black primer powder as well as the more common gloss powders. The primers have good
build and flow characteristics wet paint adhesion is very good and they are cheaper. If I was doing it at
home I would have used an Epoxy primer.

John