Hello
1. Is the part No. 1368 (screw) locking vertically the part No. 1365 (bearing house) or is the screw just a cap which should be removed before putting grease to the upper bearing. As I drilled the bolt away it is now difficult to understand what it was for.
2. I took away the part No. 1365. When assembling it how to find the right vertical position.
3. The piston pin seems to have one end solid and the other with hole. Which end is up and which down.
Questions on 102 series
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo