Clutch rod thread + any exhaust tube tips?

You can talk about almost anything here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
whigum
Posts: 55
Joined: Mon Feb 06, 2017 1:02 pm
Location: Scotland

Clutch rod thread + any exhaust tube tips?

Post by whigum »

Hello,

Can anyone confirm if the clutch rod thread is 1/4 BSF? It's apparently the only die I don't have in 1/4 to check.. Before I buy one!

And.. Can anyone give me any tips regarding a tight fitting exhaust tube? I've had plenty stiff ones in the past, and tend to just manage with a bit of messing (should I rewrite that?) .. But, I've just put together a new leg and it would be nice if there were better way.. Even after a thorough cleaning of both tube and mating surface, it's very tight.

Thanks all
whigum
Posts: 55
Joined: Mon Feb 06, 2017 1:02 pm
Location: Scotland

Re: Clutch rod thread + any exhaust tube tips?

Post by whigum »

To help anyone searching, it was indeed 1/4 BSF
Post Reply