Hi all, has anyone got a 102 tank as I am partway through a resto and nothing on Evilbay for sometime now.........
Fingers crossed that I dont have to use a late one !
Cheers Wayne 07941931827
102 tank and fitting
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
Re: 102 tank and fitting
Have you contacted John Williams at SOS?
- fleetingcontact
- Posts: 275
- Joined: Sat Aug 15, 2015 6:47 pm
- Location:
Re: 102 tank and fitting
I have a steel tank but no bayonet cap so it is unlikely I will use it. The tank was a bit rusty but I've scrubbed it clean and it seems solid. Also have the earlier ally supports.
Re: 102 tank and fitting
Oooh, l'm after one of those if Wayne doesn't require the early steel one.fleetingcontact wrote:I have a steel tank but no bayonet cap so it is unlikely I will use it. The tank was a bit rusty but I've scrubbed it clean and it seems solid. Also have the earlier ally supports.
- fleetingcontact
- Posts: 275
- Joined: Sat Aug 15, 2015 6:47 pm
- Location:
Re: 102 tank and fitting
Sold to the Aussie. Arm hanging by a tendon.
Re: 102 tank and fitting
persuasive.....
Re: 102 tank and fitting
Then you would need two bayonet caps!
Re: 102 tank and fitting
No, I still only need one for the SD.Hugz wrote:Then you would need two bayonet caps!
I do have one from a Britannia that I can use for the moment. The only external difference is that it is scripted with fuel/oil mix information.
www.vintageoutboardsaustralia.blogspot.com