Villiers carb please help!!

S2P2G · Post by **S2P2G** » Sat Apr 19, 2008 8:35 pm

HI ITS STEVE ET DOM AGAIN
CAN SOME ONE PLEASE TELL US HOW TO GET THE BLACK BOWL OFF THE
Villiers carb,BEFORE I BREAK IT.!!

niander · Post by **niander** » Sat Apr 19, 2008 10:21 pm

unscrew it...normal way...

Vic · Post by **Vic** » Sat Apr 19, 2008 10:36 pm

normal way

IE Right hand thread

S2P2G · Post by **S2P2G** » Sun Apr 20, 2008 8:23 am

IT JUST TURNS AND TURNS ??

Vic · Post by **Vic** » Sun Apr 20, 2008 9:26 am

It's screwed onto the bottom of the centrepiece/jet assembly. Is that turning because the little grub-screw that retains it is missing (see part #11 and #13 in this diagram from John's site

If the centrepiece is not turning then the threaded insert in the base of the bowl has come loose.

Note that the aforementioned grub-screw locates in the machined slot in the shoulder of the centrepiece not the round hole