brass nipple fitting to fuel tank filter

cajuncook1 · Post by **cajuncook1** » Wed Apr 17, 2013 9:38 pm

What size or type of brass connector or nipple fitting will properly mate with the fuel tank's filter/shut off valve??

What size and thread count. It appears to be a course thread.

I am in the process of ordering a new fuel pipe, but I wanted to try and make a (make do connection) to try and run the motor.

Thanks for any help.

David

Stelios_Rjk · Post by **Stelios_Rjk** » Wed Apr 17, 2013 10:56 pm

Tank to fuel tap 1/8 BSP
fuel tap to fuel line nut/threading 7/16 x 19 I think this is also called 1/4 Gas

You will need 1/4 nipple.

cajuncook1 · Post by **cajuncook1** » Thu Apr 18, 2013 1:30 am

Thank you very much for your assistance!!

Cheers

Stelios_Rjk · Post by **Stelios_Rjk** » Thu Apr 18, 2013 8:47 am

Anytime and welcome to the forum!

Saving Old Seagulls

brass nipple fitting to fuel tank filter

brass nipple fitting to fuel tank filter

Re: brass nipple fitting to fuel tank filter

Re: brass nipple fitting to fuel tank filter

Re: brass nipple fitting to fuel tank filter