Some parts wanted
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
- Stelios_Rjk
- Posts: 1458
- Joined: Sun Jun 17, 2012 10:15 pm
- Location: Athens - Greece
Some parts wanted
Some parts came to my possession and some parts are missing to complete a CP.
I have the gearbox and a good cylinder but I am missing a crankcase from a CP. I have a good one WSC, the piston turns free in the cylinder but it wouldn't be nice to have a CP with a different WSC crankcase. I can also do a swap if someone is interested.
I will also need some more parts but I think this is the most important for now.
Thank you for your time
I have the gearbox and a good cylinder but I am missing a crankcase from a CP. I have a good one WSC, the piston turns free in the cylinder but it wouldn't be nice to have a CP with a different WSC crankcase. I can also do a swap if someone is interested.
I will also need some more parts but I think this is the most important for now.
Thank you for your time
I love the 10600/145 turns!!!
- Stelios_Rjk
- Posts: 1458
- Joined: Sun Jun 17, 2012 10:15 pm
- Location: Athens - Greece
Re: Some parts wanted
In addition I have just realized that I am missing the washers between the wing nut and the tiller arm on the SD
I love the 10600/145 turns!!!
Re: Some parts wanted
There are some SD washers on ebay at the moment. Have you tried SOS?
- Stelios_Rjk
- Posts: 1458
- Joined: Sun Jun 17, 2012 10:15 pm
- Location: Athens - Greece
Re: Some parts wanted
Yeap, I saw the washers after my post about them. Thanks!
I love the 10600/145 turns!!!
- Stelios_Rjk
- Posts: 1458
- Joined: Sun Jun 17, 2012 10:15 pm
- Location: Athens - Greece
Re: Some parts wanted
5 the initial bid and 5 for postage.. 10 pounds for two washers as I have the wing nut starts getting anoying so I will see what I will do.Stelios_Rjk wrote:Yeap, I saw the washers after my post about them. Thanks!
Now I am looking for a water pump housing for a clutched silver century gearbox with a 48:12 gears.
I love the 10600/145 turns!!!
- Stelios_Rjk
- Posts: 1458
- Joined: Sun Jun 17, 2012 10:15 pm
- Location: Athens - Greece
Re: Some parts wanted
Anyone pleaseStelios_Rjk wrote:Now I am looking for a water pump housing for a clutched silver century gearbox with a 48:12 gears.
I love the 10600/145 turns!!!
Re: Some parts wanted
I'm pretty sure I have one - just hunted through loads of stuff. I am doing up a wspcl right now - which has the large crownwheel so can compare the two. Let me know if you are stuck.Stelios_Rjk wrote:Anyone pleaseStelios_Rjk wrote:Now I am looking for a water pump housing for a clutched silver century gearbox with a 48:12 gears.
Geoff - Bristol UK
- Stelios_Rjk
- Posts: 1458
- Joined: Sun Jun 17, 2012 10:15 pm
- Location: Athens - Greece
Re: Some parts wanted
Thank you very much for your response. One pump housing of this kind is on the way to me right now. I believe it will fit, but I will let you know in any case. If remember well the length of the gasket used in those gearboxes is 6.5".
I love the 10600/145 turns!!!
Re: Some parts wanted
That ok Stelios - glad you are sorted. I think the 'plus' 48 crownwheel model had thicker driveshaft tube at the lug. They step down in size just before the top bracket - maybe to do with the larger gearbox size hanging off it !Stelios_Rjk wrote:Thank you very much for your response. One pump housing of this kind is on the way to me right now. I believe it will fit, but I will let you know in any case. If remember well the length of the gasket used in those gearboxes is 6.5".
Geoff