Wanted 32mm drive shaft tube off 102 Barge pusher or silver century as I have a project to Extend my Barge pusher by 8"
I only actually need half a tube ... slight corrosion to chrome ok as it will be welded anyway.
Wanted 32mm drive shaft tube silver century or Bargepusher
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
- Niander101
- Posts: 1060
- Joined: Sun Nov 20, 2011 11:30 am
- Location: Yorkshire
Re: Wanted 32mm drive shaft tube silver century or Bargepush
I have one that has been bodged at the crankcase bracket ( new lug welded on - not too straight either ) - so really sort of no go to use as such. Its the large diameter tube - 32 - as from a wspcl. Chrome actually is quite good - from the top recess down.
So - only bottom end useable.
Swap for something ?
Geoff - Bristol
So - only bottom end useable.
Swap for something ?
Geoff - Bristol