Page 1 of 1

An Introduction ...

Posted: Sat Nov 08, 2014 12:32 am
by Jim bow
Hello all, this is my first post.
My name is Jim Bowman. I live in Tacoma Washington, just 40 miles south of the lesser city of Starbucks, er ... I mean Seattle.
I have retired from the workforce, in which I once connected computers together via wires and radio. I worked for our 911 (999) system. Very rewarding work but after 4 years of not doing it I returned for a visit and realized that I didn't understand a thing they were talking about. The Cloud? Social Media Access??
Upon retiring I filled my time, and my garage, with Jeeps and a truck. 45 Ford jeep, 47 Willy's jeep, 59 Chevrolet truck. Great fun was had by all. Until the grand child was born. We moved to Tacoma to be close to the little guy, and in doing so I lost my huge garage. I sold the vehicles off , and started looking for smaller motors to twiddle. My wife said a resounding "NO!" to my suggestion that a motorcycle would be fun.
So, I turned to wood. I bought plans for an 11 foot pram, and while waiting for them to arrive I noodled around Craigslist and found a picture of a British Seagull. I can't afford a TR3, and LR Defenders are selling here for $30 - $40K, so this was the only piece of British internal combustion I could get my hands on.
I snapped it up.
So now, all I have to do is build a boat, and restore a motor.

My first question to you, the forumites: The tank is brass, with most of the paint missing. Should I clean and polish the brass, or should I repaint it black?
Brass sure is pretty.
Thanks all!

Re: An Introduction ...

Posted: Sat Nov 08, 2014 12:57 am
by Keith.P
welcome.
What you do with the motor is up to you, what model motor it is may help with the answer.
If its a later model, the tank is about the only part you could polish, an older model may have more options.
Most parts are available to a point, again depending on the model, so a full restoration is possible and well worth doing.

Re: An Introduction ...

Posted: Sat Nov 08, 2014 1:53 am
by Jim bow
Thanks, Keith.
The motor is from the early 70s, and I intend to use it for fishing local fresh water lakes.

Re: An Introduction ...

Posted: Sat Nov 08, 2014 2:29 am
by Keith.P
The thing is, later motors have painted aluminium parts so they last and older motors had polished aluminium parts, a different type of aluminium, as I say its up to you, have a look about at other restorations on the net, you may see something you like.
You could even do it red white and blue, but I think it has already done lately.

Re: An Introduction ...

Posted: Sat Nov 08, 2014 8:02 pm
by weddigen
Hi Jim and welcome to the addictive world of the Seagull motor-you have one now-just wait!For any relevant advice you would need to post the Engine number
(on the crankcase under the dirt) and perhaps a few photos.There are several different model types. :)

Re: An Introduction ...

Posted: Sat Nov 08, 2014 8:02 pm
by weddigen
Hi Jim and welcome to the addictive world of the Seagull motor-you have one now-just wait!For any relevant advice you would need to post the Engine number
(on the crankcase under the dirt) and perhaps a few photos.There are several different model types. :)

Re: An Introduction ...

Posted: Mon Nov 10, 2014 1:19 pm
by Collector Inspector
We all love pics by the way.

Cheers

B

Re: An Introduction ...

Posted: Sat Nov 15, 2014 5:51 am
by Jim bow
FP1575 KK4. According to Mr. Williams it's a 1974 Forty Plus.
I should put my next query in the "Help" forum.

Re: An Introduction ...

Posted: Sun Nov 16, 2014 6:16 pm
by 2dogsnight
Hi Jim,

I have a 1979 Forty Plus myself.... a clutch model !....I live across the Narrows Bridge from you, on Key Peninsula.....still active in the workforce, and not much time on fun stuff......but in 3.5 years all I will be doing is having fun and no work!! :-)
Just got the tank off and looking for place to have it cleaned inside. Would love to share local sources for our little motors...when I have a source :-) So far I can't find anything in the area......
Welcome to the forum!

Wojo

Re: An Introduction ...

Posted: Sat Nov 22, 2014 5:03 am
by Jim bow
My tank is pretty clean.
Once had an old Honda 400f motorcycle with a gooped up and rusty tank. A biker friend suggested I take it to a local radiator shop. They dipped it in some sort of hot bath and it really came out nice.

Re: An Introduction ...

Posted: Sun Jan 04, 2015 6:26 am
by 2dogsnight
Happy New Year Jim!
How is boat building coming?? I started working on my Seagull again - as spring is on it's way :-)
here is a boat that I want to use the motor on ...... a Glen L15 sailboat. Can be used as a sailboat, motorboat and rowing is a possibility.
Take care