Search found 115 matches

by red42hj
Tue Jun 23, 2020 11:30 pm
Forum: Help
Topic: 102 help
Replies: 25
Views: 37272

Re: 102 help

the lower unit picture is on the previous page. I took the prop off. I'll have to find it to identify it. I 'll let you know. Red
by red42hj
Mon Jun 22, 2020 10:59 pm
Forum: Wanted
Topic: TC 102
Replies: 0
Views: 38474

TC 102

4:1 ratio gearbox clutched ( bargepusher)
wanted for TC 102
by red42hj
Mon Jun 22, 2020 8:18 am
Forum: Help
Topic: 102 help
Replies: 25
Views: 37272

Re: 102 help

The cooling system has been checked ok . the engine starts and runs well, but struggles with the standard prop on . If anyone has a 4:1 barge pusher gearbox ( clutched) I would be most interested in trying that. My boat is quite heavy and it might be more suitable.
by red42hj
Sat Jun 20, 2020 9:40 pm
Forum: Help
Topic: 102 help
Replies: 25
Views: 37272

Re: 102 help

Ok, lets just forget the whole thread.
by red42hj
Fri Jun 19, 2020 10:02 pm
Forum: Help
Topic: 102 help
Replies: 25
Views: 37272

Re: 102 help

Thanks Charles, it seems the g.box is right for the engine. what would a 4:1 box be used for though? The reason I queried my box is that the engine gets a bit warmer than it should when made to work hard and then breaks down . I've had to use a smaller prop than normal to get the speed up and get go...
by red42hj
Fri Jun 19, 2020 12:49 pm
Forum: Help
Topic: 102 help
Replies: 25
Views: 37272

Re: 102 help

Thanks, attached are 2 pics. the engine is TC 55048L 1956 to 66. long shaft clutched
regards. Red.
by red42hj
Thu Jun 18, 2020 9:08 am
Forum: Help
Topic: 102 help
Replies: 25
Views: 37272

Re: 102 help

Hi, Just checked my TC102 gear ratio, and it is 5 flywheel turns to 2 prop turns. Do I have the wrong gearbox?
by red42hj
Mon May 18, 2020 8:29 am
Forum: Help
Topic: 102 help
Replies: 25
Views: 37272

Re: 102 help

Hi, just looking back at 102 help. regarding the prop and gear box; 4:1, does that mean 4 turns of the flywheel to 1 of the prop?
cheers, red.
by red42hj
Tue Aug 27, 2019 8:47 am
Forum: Help
Topic: TC 102 Ignition
Replies: 0
Views: 37723

TC 102 Ignition

I'm going to fit a modern villiers type coil ( far East copy ) and condenser to the engine. Does anyone have any idea what output the original coils should be? I managed to get the engine to run quite well, but heavy loading it seems to lack power. Had to use smaller prop to keep up the revs to assi...
by red42hj
Sun Aug 18, 2019 5:46 am
Forum: Help
Topic: Saga of the TC 102
Replies: 4
Views: 9389

Re: Saga of the TC 102

Still finding problems with the TC. The float was too high as it had somehow slipped up the needle above the groove. Explains the fuel spray coming out of the cowling. The ignition system is suspect. ( Villiers ) can anyone suggest a modern coil replacement? Also a condenser? I'm told the Wipac is a...
by red42hj
Fri Aug 02, 2019 10:11 pm
Forum: Help
Topic: Saga of the TC 102
Replies: 4
Views: 9389

Re: Saga of the TC 102

Sorry, I should have said; this was during a run up the river.
by red42hj
Fri Aug 02, 2019 10:07 pm
Forum: Help
Topic: Saga of the TC 102
Replies: 4
Views: 9389

Re: Saga of the TC 102

Thanks Oyster.
by red42hj
Fri Aug 02, 2019 7:36 am
Forum: Help
Topic: Saga of the TC 102
Replies: 4
Views: 9389

Saga of the TC 102

managed to get the TC 102 running, but when in gear, cannot get enough revs to keep it cool. The (external ) water exhaust stops below a certain rev range, and the engine overheats. The impeller is good and the water system clean. In neutral ,it runs well. Tried changing to a smaller prop which help...
by red42hj
Thu Jul 04, 2019 9:15 am
Forum: Help
Topic: My TC 102
Replies: 4
Views: 8489

Re: My TC 102

Yes got that just fine, photo of engine will be on the way in a couple of days. I left it on the boat.
These swans are on the river Arun in West sussex by the way.
by red42hj
Thu Jul 04, 2019 9:06 am
Forum: Help
Topic: My TC 102
Replies: 4
Views: 8489

Re: My TC 102

IMG_20190701_180313.jpg