Ok yes ill make a tool...and yes i would never chew them up...
thankfully no butcher has been there before!
I hate chewed up screw heads!
Search found 501 matches
102 block
Hi i think my 102 block is blocked as its really hard to blow down the cooling water pipes
i notice the large screws in the side of the block ...are these for clearing out the crap from the block?
any advice appreciated
cheers
i notice the large screws in the side of the block ...are these for clearing out the crap from the block?
any advice appreciated
cheers
- Sat Jul 14, 2007 9:10 am
- Forum: General Topics
- Topic: carburetor complexity?
- Replies: 7
- Views: 9321
- Fri Jul 13, 2007 10:06 pm
- Forum: General Topics
- Topic: Putting the 102 together
- Replies: 1
- Views: 3100
- Thu Jul 12, 2007 7:33 pm
- Forum: General Topics
- Topic: Putting the 102 together
- Replies: 1
- Views: 3100
Putting the 102 together
Ok I'm gonna fit the motor together any tips concerning getting the water pipe in the hole looks like it might be a bit fiddly
finger in exhaust outlet i presume?
finger in exhaust outlet i presume?
- Wed Jul 11, 2007 10:26 am
- Forum: General Topics
- Topic: ignition wire connector?
- Replies: 1
- Views: 3645
ignition wire connector?
Any one know where i could get one of these from...small connector with a screw on each end to join a broken HT wire?
also the petrol tap has a small filter in the end
can is it possible to replace this?
also the petrol tap has a small filter in the end
can is it possible to replace this?
- Sun Jul 01, 2007 3:04 pm
- Forum: General Topics
- Topic: Having a laugh...
- Replies: 14
- Views: 13612
- Tue Jun 12, 2007 12:33 pm
- Forum: General Topics
- Topic: Finally it's running...
- Replies: 5
- Views: 6276
So it'll be the 102 barge pusher that a kind gentleman gave me last week. He wanted me to look at his gearbox, but brought along a box of 'spares' that he wanted rid of. When I got it all home it only needs a magneto, a bracket, and the water pipe union from the water pump housing. As the thing is a...
- Mon Jun 11, 2007 9:22 pm
- Forum: Help
- Topic: only when i spin the motor fast enough with a drill!
- Replies: 3
- Views: 5341
- Mon Jun 11, 2007 5:51 pm
- Forum: Help
- Topic: only when i spin the motor fast enough with a drill!
- Replies: 3
- Views: 5341
- Sat Jun 09, 2007 10:12 am
- Forum: Help
- Topic: only when i spin the motor fast enough with a drill!
- Replies: 3
- Views: 5341
only when i spin the motor fast enough with a drill!
Hi seagull experts!
well i changed the old points ignition for an electronic set
and i get a spark but only when i spin the motor fast enough with a drill!
so i don't think she would start like this.
the spark looks ok spinning using the drill...any ideas?
well i changed the old points ignition for an electronic set
and i get a spark but only when i spin the motor fast enough with a drill!
so i don't think she would start like this.
the spark looks ok spinning using the drill...any ideas?
- Thu Jun 07, 2007 6:43 pm
- Forum: General Topics
- Topic: electronic ignition ...spark
- Replies: 2
- Views: 4165
- Thu Jun 07, 2007 6:00 pm
- Forum: General Topics
- Topic: electronic ignition ...spark
- Replies: 2
- Views: 4165
electronic ignition ...spark
Hi seagull experts!
well i changed the old points ignition for an electronic set
and i get a spark but only when i spin the motor fast enough with a drill!
so i don't think she would start like this.
the spark looks ok spinning using the drill...any ideas?
well i changed the old points ignition for an electronic set
and i get a spark but only when i spin the motor fast enough with a drill!
so i don't think she would start like this.
the spark looks ok spinning using the drill...any ideas?
- Thu Jun 07, 2007 12:29 pm
- Forum: General Topics
- Topic: Do you go sailing in Poole Harbour?
- Replies: 4
- Views: 5981