Saving Old Seagulls

oh i'm sorry, the motor is one of the last forty.. id number is TSEFPCL4 90A2. Yes the oil is black, coming from the base of the exaust tube, but the leak is considerable. Now i'm going to check the level of the oil of the gearbox.. i hope that the problems doesn't depend by replacing gaskets

tank ...

the problem was that, opening the head, i was forced to remove the transmission of the pump, where now is dripping oil.
Certainly i've to open the drive box, but i've not the right hexagonal wrench.Do you now what size of wrench i've to use? Beause probably is difficult to find in my country

Replacing gaskets was necessary because, even if the engine was working properly, there was some dripping of fuel through the head.
The oil was replaced one month ago... the problem starts from removing the water tube from the gear for making the replacement possible..
In a first time the tube don't ...

Hi guys!!! First thing. have a nice holiday!Second thing: i've recently replaced head and base of cylinder gaskets, but when in sea the engine starts hardly, like it was flooded, working hard... during replacing, i've had to remove the cylinder with the pipe of water-cooling and some oil dropped ...

Hi guys!
My engine is dirty, what's about cleaning all surface with acetone?

Hi guys!
If u want to see some pictures and videos about seagulling in 5 terre you can see them in my page on facebook.
My ID is meolo2002, please write "seagull" in the text box when adding as a friend.
[/img]

Hi, guys!
I've found in a specialized shop a sheet of special paper made to resist to for doing gasket. Maybe it's the same material for doing the gasket of cylinder heads.
In any case i'll order the originas iby John as soon as possible.
Many tanks!!
Alessndro

Oh i'm sorry i didn't read the FAQ page... It's decisive!
But i've another problem: i've no gaskets on fuel tap and on the cap of the tank: unfortunately i've bought this engine from a fool, and i'm renovating step by step.
How i can replace it whithout buying as a spare(because i would use it as ...

Hy guys!
I'm sorry but i've sent an e-mail to john about some problems, but in this period his mail is out of order...
I'll forward you the mail:

Hi John!
How are you? I'm sorry for bother you, but i've some problems with the gull... When the sun warms the tank, some fuel flow through the tap ...

Hi guys!
i'm Alessandro, a new member from Italy...
In my fourthy there insn't any side for anode avoiding corrosion.
Usually how do you solve the problem?
Regards
Alessandro