Saving Old Seagulls

Hello Charles,
Many thanks for your response,If I understand you right there is a separation joint below the recoil riveted top.
the two screws you mention are missing and from inspection of the unit there are casting seams in both sections that don't line up which confirm there are two parts. I ...

Hello Keith,
Just got home, long day Many thanks for the info will have a look tomorrow
Kind regards john.

Hello,
Any information would be helpful.
I recently purchased a seagull engine with a SIBA recoil start and electronic ignition. engine no. ESC593HHE.
Although seems to be in good condition with a healthy spark the recoil cord needed to be replaced as a bit worn,
On removing the bolts holding the ...

Hello Electrosys,
Many tanks for taking the trouble to respond,I think you've solved the problem!- no cork I'll have to investigate the spares availability. once again Many thanks,Regards John.

Hello,
just wondered if anyone can help. I recently purchased an old seagull engine fitted with a recoil start that doesn't work.
the recoil works perfectly and operates two small steel arms that 'fly' out when the cord is pulled,but don't engage with the inside of the aluminium sleeve that is also ...

I bought this engine over 30 years ago still in its original packing case, although riddled with woodworm. The engine was unused and covered in a red corrosion inhibitor which washes off easily with petrol as can be seen by the flywheel and base plate.
Unfortunately the coil is knackered and I ...