Modified Flywheel nuts for lifting motors
Posted: Wed Apr 18, 2012 2:55 pm
Following the suggestions on this Forum regarding a means of attaching a shackle to the flywheel nut, i have has made a new stainless nut, approx 3/4 inch higher with a 6mm clearance hole bored accross it.
This allows the use of a wide shackle and a lifing strop to be fitted.
Only applies to Magneto ignition motors of course....
They come in at £7.50. contact me via the main site please.
Seems the idea is not as novel as I first thought though, as several other makes of outboard have in fact offered this as an option over the past 40 years, just never Seagull, till now!
Regards,
John
SOS
This allows the use of a wide shackle and a lifing strop to be fitted.
Only applies to Magneto ignition motors of course....
They come in at £7.50. contact me via the main site please.
Seems the idea is not as novel as I first thought though, as several other makes of outboard have in fact offered this as an option over the past 40 years, just never Seagull, till now!
Regards,
John
SOS