Hello.
Have any members got a set of standard piston rings,to fit a Seabee 31/2 hp.
This has a JAP engine 79cc , If you do and want to sell them will you please contact me (PM).
Thanks.
Ray.
Wanted piston rings
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
- RAY SWANN
- Posts: 57
- Joined: Sun Nov 08, 2009 1:35 am
- Location: International space station (toilets blocked again)
Wanted piston rings
SOME DO, SOME DONT,THOSE WHO DONT, DO A BIT
Re: Wanted piston rings
Hello Ray - there were for some reason several engines around the 79cc size about in the '60's and probably ten years either side at least, normally of Villiers origin, and Villiers did own JAP, so you may well find Villiers rings of the same dimensions.
I mention this just in case it opens up more search possibilities for you.
Probably teaching my granny to suck eggs, but if you get into size charts, all you need to know is the piston diameter, ring thickness and depth, and then just the detail for the locating peg. Rick
I mention this just in case it opens up more search possibilities for you.
Probably teaching my granny to suck eggs, but if you get into size charts, all you need to know is the piston diameter, ring thickness and depth, and then just the detail for the locating peg. Rick
- RAY SWANN
- Posts: 57
- Joined: Sun Nov 08, 2009 1:35 am
- Location: International space station (toilets blocked again)
Re: Wanted piston rings
Hello Rick.
Yes usefull information,thank you .
I did measure up the rings so will take a look a villers parts.
One thing though the locating pins are off set on the villers engines in the ring grooves.
On the Jap engine the pins are in the center of the ring groove so the rings are cut away on the inside to overlap
the pin.
May only take a fine file to modify villiers rings.
Thank you for the information.
Regards
Ray.
Yes usefull information,thank you .
I did measure up the rings so will take a look a villers parts.
One thing though the locating pins are off set on the villers engines in the ring grooves.
On the Jap engine the pins are in the center of the ring groove so the rings are cut away on the inside to overlap
the pin.
May only take a fine file to modify villiers rings.
Thank you for the information.
Regards
Ray.
SOME DO, SOME DONT,THOSE WHO DONT, DO A BIT
- RAY SWANN
- Posts: 57
- Joined: Sun Nov 08, 2009 1:35 am
- Location: International space station (toilets blocked again)
Re: Wanted piston rings
Hello Rick.
You were right about the piston rings.
Managed to get a new set and they where in a Villiers box with a villiers part number.
Thanks
Ray
You were right about the piston rings.
Managed to get a new set and they where in a Villiers box with a villiers part number.
Thanks
Ray
SOME DO, SOME DONT,THOSE WHO DONT, DO A BIT