Bakelite HT cap for a FVP

Post your wanted adds here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
dblunn
Posts: 6
Joined: Thu Oct 04, 2007 5:06 am
Location: Berry, NSW, Australia

Bakelite HT cap for a FVP

Post by dblunn »

Hi, I have a new rubber one but I just can't bring myself to cut the lug off to fit it. Can anyone sell me an old Bakelite cap at a reasonable price?
Regards,
Dave
NSW Sth Coast, Australia
Top
User avatar
timberman2004
Posts: 375
Joined: Wed Apr 02, 2008 11:11 pm
Location: Lerryn Cornwall

Post by timberman2004 »

bloody right mate !!!

£ 1-50 .......and in good old ebay terms ,...£ 1600-00 P&P

seriously ..ask John @SOS
Neal...errrr... an ON, OP, 2xSD, F, 3xSJP, LLS, 2xFV, FVP, FPC, CPC WPCL, WSC, and a few eggs hatching, hopefully
Top
User avatar
40TPI
Posts: 451
Joined: Fri Jan 26, 2007 7:08 pm
Location: North Buckinghamshire, 110 miles south of Yorkshire, England.

Post by 40TPI »

I'm sure John can sort something but then again I'm sure there MUST be a source of sensible non resistive plug caps in that part of the old Colonies without having to resort to shipping a plug cap half way round the world .. :)
But if has to look original.........

Peter
Top
dblunn
Posts: 6
Joined: Thu Oct 04, 2007 5:06 am
Location: Berry, NSW, Australia

Still hopeful

Post by dblunn »

Thanks fellas,
I have emailed John and am awaiting a reply.
There used to be a dealer of Seagull parts in Oz but they dropped the line, don't know if anyone is supporting Seagull in Australia now.

Yes I do want it to look original as they are such a pretty motor and I have done quite a bit of work on it already, not show quality but a nice -true to type- working motor.

Regards,
Dave
Regards,
Dave
NSW Sth Coast, Australia
Top
Post Reply

Return to “Wanted”