3D printing

You can talk about almost anything here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
User avatar
JERSEYMAN
Posts: 665
Joined: Sun Jul 31, 2011 2:47 pm
Location: Jersey, Channel Islands

3D printing

Post by JERSEYMAN »

An interesting 3D printed thrust block, pretty cool, amazing what you can find on eBay
Attachments
2246AD3F-4382-42E9-8DFE-996735F6C783.jpeg
1B878BB4-E542-477C-A658-BB1F8138E251.jpeg
82F7B142-8ADC-4F34-9B11-672FDFCAE26F.jpeg
5D5A9047-36CB-4A78-BBE9-1FDE5CE3EDF6.jpeg
Top
User avatar
Nudge
Posts: 830
Joined: Sun Feb 15, 2015 2:43 am
Location: Auckland, New Zealand

Re: 3D printing

Post by Nudge »

I have 3d printed parts for seagulls....So a new part could be cast!
It would have looked better if the layer height was smaller or at least cleaned up a bit.
"THE KING OF BLING"!
Is it better to over think, than not think at all?
Top
Post Reply

Return to “General Topics”