Before I have one machined up, do any members have one spare they might consider selling?
Many thanks.
Marston/SD flywheel puller
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
- NaughtyBits
- Posts: 205
- Joined: Fri Apr 17, 2015 6:30 pm
- Location: Bermuda
- NaughtyBits
- Posts: 205
- Joined: Fri Apr 17, 2015 6:30 pm
- Location: Bermuda
Re: Marston/SD flywheel puller
Searching old topics, I understand the thread is 1 & 1/8" x 16 TPI, left hand thread...
Re: Marston/SD flywheel puller
I have one, bring engine over and I can pull flywheel for you
- NaughtyBits
- Posts: 205
- Joined: Fri Apr 17, 2015 6:30 pm
- Location: Bermuda
Re: Marston/SD flywheel puller
Sounds good Michael, thanks. I'm good for now, though - mine had been well greased up & came off with the slightest tap.
But I know there's a bunch more SD owners here now who'll need pullers at some point - figured it'd be a good thing to either source a couple or get a them made up for people.
Thanks though, I'll give a shout if/when in need.
But I know there's a bunch more SD owners here now who'll need pullers at some point - figured it'd be a good thing to either source a couple or get a them made up for people.
Thanks though, I'll give a shout if/when in need.
- Collector Inspector
- Posts: 4183
- Joined: Sun Jun 29, 2008 4:32 am
- Location: Perth Western Australia
- Contact:
Re: Marston/SD flywheel puller
Charles will chip in soon I am sure.
There were a few on SOS but they have all sold out sadly.
They are of some complexity to manufacture a decent quantity run to keep the cost to us punters down.........there may be a list of those wanting needed before any more.
BnC
There were a few on SOS but they have all sold out sadly.
They are of some complexity to manufacture a decent quantity run to keep the cost to us punters down.........there may be a list of those wanting needed before any more.
BnC
A chicken is one egg's way of becoming others
Re: Marston/SD flywheel puller
I'd buy one when available.
- NaughtyBits
- Posts: 205
- Joined: Fri Apr 17, 2015 6:30 pm
- Location: Bermuda
Re: Marston/SD flywheel puller
Oyster, I'll touch base when we make up a few.