The wist pin is a tube that is closed off at one end.
When I pulled the motor apart the closed side of the wrist pin was pointed to the exhaust port.
When I reassembled the open side was pointed to the exhaust port. (oops...)
Does it matter?
Oops... Wrist pin
Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo
- Charles uk
- Posts: 4954
- Joined: Wed Feb 27, 2008 4:38 pm
- Location: Maidenhead Berks UK
Re: Oops... Wrist pin
I always fit them closed end up, worried about them filling with oil & getting heavier, but don't recall anything regarding this in any of the Seagull paperwork.
Make it idiot proof and someone will make a better idiot.
-
- Posts: 20
- Joined: Fri Aug 10, 2018 4:18 am
- Location: Vancouver BC
Re: Oops... Wrist pin
That was my logic in assembling with open end down as well...
Going back through the pictures from when I disassembled I noticed it was open end up.
Thought I would ask.
Thanks,
Going back through the pictures from when I disassembled I noticed it was open end up.
Thought I would ask.
Thanks,