Clutch stud thread size

seagull101 · Post by **seagull101** » Sat Jul 08, 2017 5:22 pm

Hello everyone,

Can somebody please tell me the thread size for a silver century clutch stud so that i can order a tap?

Cheers, Jacob

haventaclue · Post by **haventaclue** » Sat Jul 08, 2017 6:22 pm

viewtopic.php?f=2&t=6040
A very good post by Nudge.

seagull101 · Post by **seagull101** » Sat Jul 08, 2017 7:22 pm

Either I'm blind or its not there!

fleetingcontact · Post by **fleetingcontact** » Sat Jul 08, 2017 9:49 pm

You're not blind, it's not here despite recent claims to the contrary. Hole is 3/8" on all models prior to FNR models with the thicker driveshaft tube. There is a chart somewhere on the web which tells you the correct size drill to use prior to tapping, but Charles reckons a 8.5mm bit will do it and I expect in this he is right.

I think I said 8.25mm
Charles

Hugz · Post by **Hugz** » Sat Jul 08, 2017 10:33 pm

Same as a tiller stud.

Saving Old Seagulls

Clutch stud thread size

Clutch stud thread size

Re: Clutch stud thread size

Re: Clutch stud thread size

Re: Clutch stud thread size

Re: Clutch stud thread size