Thread Size of Transom Thumbscrews

THCL500J8 · Post by **THCL500J8** » Wed Dec 30, 2015 2:59 am

Hi anyone know what size tap and die i need to redo some crap thumbscrews on a few motors?
Or if anybody sells (New ones)

Thanks

Unscrewed

Stelios_Rjk · Post by **Stelios_Rjk** » Wed Dec 30, 2015 7:24 am

If my memory serves me well it is 7/16 BSW.

Post by **RickUK** » Wed Dec 30, 2015 10:31 am

Yep - it is.

In the UK there are companies selling imperial taps and dies, either individually or as sets, Tracy Tools being one of them - sure they would post overseas.

Rick

Oyster 49 · Post by **Oyster 49** » Wed Dec 30, 2015 12:43 pm

There are usually a good number of taps and dies to be found on eBay, of varying quality it has to be said. John at SOS can supply new thumb screws of course, listed on the main web site.

THCL500J8 · Post by **THCL500J8** » Wed Dec 30, 2015 2:34 pm

Thanks all for your help,

Tap and Die ordered from Ebay

No longer screwed.

Stelios_Rjk · Post by **Stelios_Rjk** » Wed Dec 30, 2015 8:33 pm

Get also a 9.20mm or a bit less drill. That's the tap drill diameter.

Adrian Dale · Post by **Adrian Dale** » Wed Dec 30, 2015 9:22 pm

Load of outlets in Auss that sells, try Nuts n' Bolts: Numco; Blackwoods. All have outlets throughout.

AJ

Saving Old Seagulls

Thread Size of Transom Thumbscrews

Thread Size of Transom Thumbscrews

Re: Thread Size of Transom Thumbscrews

Re: Thread Size of Transom Thumbscrews

Re: Thread Size of Transom Thumbscrews

Re: Thread Size of Transom Thumbscrews

Re: Thread Size of Transom Thumbscrews

Re: Thread Size of Transom Thumbscrews