1943 SD for sale

[BillyKnight]

Hello,
I have a 43 model SD for sale. The motor is complete apart from the thrust block. It runs but really needs restoring. A very early model with the Marston type cases which do not have "Seagull" cast into them.
It looks pretty original to me, old type MK1 magneto, bronze clutch lever, brass exhaust tube, steel tiller handle etc. It has a later type brass tank as they all seem to have, I think the original steel ones did not last this long. Also not correct is the chrome type throttle lever, should it be brass? The bracket is bronze, the alloy one in the pics was damaged and I replaced it. I have also had a look in the gearbox and it is in excellent condition.
I would like to see this motor restored, if I get no takers then it can stay stashed away and I may do it myself one day!
Motor is in Southampton, would prefer buyer to inspect, collect etc. I am looking at £100 for this motor which i think is a fair price. Call me on 07824-409711 if you'd like to come and have a look.
Thanks,
Billy.

[Oyster 49]

Can you post some better pictures, showing the top of the magneto, the gearbox nipples, and the carb? Does it have the ministry inspector stamp on the skeg, also what is the engine number?

[BillyKnight]

Yes, no problem. Seems like quite a lot of interest in this motor. I can't see any stampings on the motor, I know the ones you are talking about.
Billy.

[BillyKnight]

The engine is sold, to one of our regulars. I look forward to seeing the restoration work on the site!
Nice bunch of people on here, thanks.
Billy.

[Oyster 49]

Excellent, looks like a good project, most of the correct items are there apart from a few later parts fitted. I think that's a fair price too. Look forward to seeing the strip and rebuild!

[Oyster 49]

So who bought this one? Are we going to see the rebuild?

[JERSEYMAN]

Guess Who

[Oyster 49]

Excellent. How many seagulls now? I expect it to look like my avatar soon!

[JERSEYMAN]

The motor is spot on

one interesting thing that I have not seen before is that the crank case is a slightly different shaped casting and without he Seagull logo embossed, it's identical to my ON casing, same quality also, you guys no doubt know this I just never noticed it.

And Adrian, it's 137, nuts or what!

[headdownarseup]

HEY
137
that's not nuts?

that's a terminal illness.

where do you keep them all?

bad enough for me with 15 and i work out of a 10ft by 8ft shed and still cant move in there.


(note to self- must buy bigger shed. MUCH BIGGER)

j