seagull refeuller

gadget · Post by **gadget** » Thu Apr 06, 2006 8:38 am

Hi was watching this item on ebay a few weeks ago.
Refueller -> http://www.qksrv.net/click-1497616-9254 ... 4624880216
does anyone know how they work. is there a tube that goes from the end to the air inlet , thinking about making one , thanks gadget

chris · Post by **chris** » Thu Apr 06, 2006 9:28 am

I own one and they work really well.
There is a hose on the end. The filler cap is a standard seagull cap.
you undo the breather and put the filler hose into the tank and lift it up, it fills very easily and is good in rough conditions. when not in use the end of the hose goes over a sort of rod on the tank that stops it from leaking.
Got mine on ebay for 20 pounds including shipping to Australia, no one at the time new what it was so got it cheap.

gadget · Post by **gadget** » Thu Apr 06, 2006 10:15 am

thanks chris , so is the metal bar at the top of the tank where the pipe goes on when not in use . if so that explains my confusion ( thought it might have been an air bleed but only ever seen a picture i was guessing ) but makes making one a lot easyer. thanks gadget

chris · Post by **chris** » Fri Apr 07, 2006 11:08 am

yes that is what it is for.
they are a very handy thing to have

CatiGull · Post by **CatiGull** » Sun Apr 09, 2006 12:29 pm

I looked at the ebay one and realised I could just use one of my Spare seagull tanks in the same manner so did not bid - A dollar saved is 1/2 a pound earned as we say in the States.