Throttle Cable

You can talk about almost anything here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
User avatar
outboard
Posts: 299
Joined: Thu Oct 15, 2009 11:28 pm
Location: Ayrshire, Scotland

Throttle Cable

Post by outboard » Mon Sep 19, 2011 9:37 pm

Can anyone tell me how I'd go about getting an extended throttle cable suitable for a 40+ if I was trying to fit my Seagull to a steering system?

User avatar
Hugz
Posts: 3249
Joined: Wed Mar 14, 2007 4:41 am
Location: Sydney

Re: Throttle Cable

Post by Hugz » Mon Sep 19, 2011 10:38 pm

Easy enough to make your own. Buy some cable and sheath from your local bike shop. Mention it is for a tandembike if you wish it to be extra long. Make a mould of the existing two ends (though you may find a bike break end will fit into the throttle lever with a small bit of filing) using clay, plasticene, dental materal etc. Clean and tin the ends of cable and then fill your mould with molten solder whilst dipping the end of cable in while applying heat.

User avatar
outboard
Posts: 299
Joined: Thu Oct 15, 2009 11:28 pm
Location: Ayrshire, Scotland

Re: Throttle Cable

Post by outboard » Tue Sep 20, 2011 7:34 pm

Cheers Hugz, great bit of information, and easy to understand. Being a dental technician I work making moulds daily.

Horsley-Anarak
Posts: 2752
Joined: Thu Aug 07, 2008 8:42 pm
Location: Surrey

Re: Throttle Cable

Post by Horsley-Anarak » Tue Sep 20, 2011 7:52 pm

outboard wrote: Being a dental technician I work making moulds daily.
Mercury amalgam or gold for the cable ends?

Use gold then it will be a very valuable seagull :)

H-A

User avatar
outboard
Posts: 299
Joined: Thu Oct 15, 2009 11:28 pm
Location: Ayrshire, Scotland

Re: Throttle Cable

Post by outboard » Tue Sep 20, 2011 9:45 pm

Amalgam sounds good. It's harder and a wee bit cheaper than gold.

Cheers

User avatar
Charles uk
Posts: 4754
Joined: Wed Feb 27, 2008 4:38 pm
Location: Maidenhead Berks UK

Re: Throttle Cable

Post by Charles uk » Tue Sep 20, 2011 10:07 pm

Tandem gear cables are 2100mm long & have stainless steel inners, that you have to use Laco acid plumbers flux to solder or silver solder the throttle lever nipple in place, they all ready have one almost the right size for the carb.
Make it idiot proof and someone will make a better idiot.

User avatar
outboard
Posts: 299
Joined: Thu Oct 15, 2009 11:28 pm
Location: Ayrshire, Scotland

Re: Throttle Cable

Post by outboard » Wed Sep 21, 2011 8:38 pm

Thanks guys, now know where I'm going.

Post Reply