fuel tap thread size

You can talk about almost anything here

Moderators: John@sos, charlesp, Charles uk, RickUK, Petergalileo

Post Reply
User avatar
outboard
Posts: 299
Joined: Thu Oct 15, 2009 11:28 pm
Location: Ayrshire, Scotland

fuel tap thread size

Post by outboard »

Hi guys, I'm working on an old (was seized) 40+. It had a glass filter fuel tap on the tank so I decided to change that to a brass fuel tap, however, the thread size on the brass tap is much smaller and won't fit the tank. Can anyone tell me what thread size differences there are in these fuel taps so that I can try and get an adaptor to get the brass tap up to the fuel tank size. Are all fuel tanks threaded to one size? I bought this brass tap on the bay and might have been duped (maybe not) but it has happened before, would you believe that?

Gerry :oops:
User avatar
charlesp
Posts: 2567
Joined: Mon Mar 06, 2006 1:37 pm
Location: Poole, Dorset, England

Re: fuel tap thread size

Post by charlesp »

All the fuel tanks were threaded to one size, but for the life of me I can't remember what size that was. Best bet is to wait for the other Charles, he may know off the top of his head.
User avatar
Charles uk
Posts: 4951
Joined: Wed Feb 27, 2008 4:38 pm
Location: Maidenhead Berks UK

Re: fuel tap thread size

Post by Charles uk »

He might, but he doesn't remember, I think it's a cycle thread.
All cycle threads are 32 Tpi, but can't find a loose one to measure.
Make it idiot proof and someone will make a better idiot.
Horsley-Anarak
Posts: 2838
Joined: Thu Aug 07, 2008 8:42 pm
Location: Surrey

Re: fuel tap thread size

Post by Horsley-Anarak »

The thread size that takes the Ewarts fuel tap is 1/8" B.S.P.

This is a 28 tpi thread with a major external diameter of 0.383".


H-A
User avatar
Rex NZ
Posts: 244
Joined: Mon Nov 22, 2010 10:33 pm
Location: Rotorua, New Zealand.

Re: fuel tap thread size

Post by Rex NZ »

Concur with H-A

1/8" BSP

Don't confuse with 1/8" NPT American. These look the same

Rex
User avatar
outboard
Posts: 299
Joined: Thu Oct 15, 2009 11:28 pm
Location: Ayrshire, Scotland

Re: fuel tap thread size

Post by outboard »

Thanks for the info guys. I would reckon either my tank has been tapped out, or, which is more likely, I've been sold a useless brass fuel tap.
Will check it against one in my other 40+ and let you know.

Gerry
Post Reply